Topic: Cascading of two HDSP 9652 in a PC
Hi there
Found nothing in the archive here, so my question is:
Is it posible to cascade two HDSP 9652 cards to get 6 ADAT I/O and
do they work under DIGICheck and Hammerfall DSP?
Thanks,
Franky
You are not logged in. Please login or register.
RME User Forum → HDSP(e) series → Cascading of two HDSP 9652 in a PC
Hi there
Found nothing in the archive here, so my question is:
Is it posible to cascade two HDSP 9652 cards to get 6 ADAT I/O and
do they work under DIGICheck and Hammerfall DSP?
Thanks,
Franky
Thanks. hehehehe....... short and on the point.
Ok, here my last question:
I wanna set up these cards on a pentium 4 motherboard with a plain Windows XP on it to run this PC only as a 48 channel Multitrack recorder. Is there any recommendation regarding usable chipset, motherboard brand ec. ec. ?
I dont wanna buy twice. ;-)
Thanks in Advance,
Franky
If you make it a core 2 duo, which will be just as cheap, I have advice. P45 or p35 chipset. DDR2 800 ram, cheap dualcore cpu. These chipsets also have sata which will be much better for the HD´s.
Oh and good working PCI slots.
Hi everybody
Just a last report. System runs perfectly without a doubt.
Facts: plain Windows XP pro, Intel core 2 duo, Gigabyte GA-Q35M-S2 motherboard, 2GB RAM, 160GB IDE main HDD, 1TB SATA data HDD, 2 x HDSP 9652 boards connectet via TOSlink to 3 x Apogee AD converter AD16. Newest HDSP drivers and DIGIcheck 5.51.
Recordet all 52 tracks around 3 h at 24bit/48KHz. HD load: 5%!!!
Thanks for all the good hints,
Franky
Great! Thanks for reporting, it is nice to know advice was not lost in internet space.
Good luck
Vincent
RME User Forum → HDSP(e) series → Cascading of two HDSP 9652 in a PC
Powered by PunBB, supported by Informer Technologies, Inc.