• Registered: 2013-01-30
  • Posts: 4

Topic: Inputs Doubled RME HDSPe MADI FX

Hi,
I have to set a DAW for an academic project  (measurements with a microphone array).
I'm going to describe my setup.

1 Lynx Aurora 16 + L-slot MADI
2 Presonus Preamp 8 channel
1 Rme HDSPe MADI FX
Pc Win7

The Presonus preamp are input in the Aurora
The Aurora is connected to the Rme madi fx via MIDI
The Aurora MADI I/O are connected to the Rme MADI3 I/O via BNC.

Everything is ok, The Aurora is sync with RME.

I routed che I/O channels withTotalMX but I noted that every input is doubled. For example:
Aurora input channel 1 is replicated in 1/2 and 3/4 RME input channels.

Do you know which could be the reason?
I hope I've explained well the situation.
Thanks for your help

  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,684

Re: Inputs Doubled RME HDSPe MADI FX

Sounds like the Aurora is running at 96k and the MADI card at 48k.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website

  • Registered: 2013-01-30
  • Posts: 4

Re: Inputs Doubled RME HDSPe MADI FX

Thank you for your answer! It's exactly like you said, now the rme MADI card and the Aurora work perfectly!