• Registered: 2013-03-09
  • Posts: 58

Topic: Adat 2 7 & Adat 2 8 Level meters onloy up to -10db ?

Today I wanted to mic a drumkit using the second Adat input of my UFX. I wanted to adjust the levels with DigiCheck. The meters vor the last two channels did not go above -10db although the Adat converter itself was already clipping and also the Meters at the front of des Fireface UFX were in the red. Is there something I have to check ?

I am on Windows 7 64 bit. Latest Driver, Firmware and Digicheck installed.

Cheers
Alex

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Adat 2 7 & Adat 2 8 Level meters onloy up to -10db ?

> Is there something I have to check ?

You activated EQ or Dynamics in those channels and have those within the recording path (Settings dialog...).

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2013-03-09
  • Posts: 58

Re: Adat 2 7 & Adat 2 8 Level meters onloy up to -10db ?

Hi,

danke für die Antwort, leider ist beides nicht der Fall.

Grüße
Alex

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,774

Re: Adat 2 7 & Adat 2 8 Level meters onloy up to -10db ?

Wie sehen die Pegel denn in Totalmix aus? Viellelicht zeigt DC ja RMS an...?

mfg
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2013-03-09
  • Posts: 58

Re: Adat 2 7 & Adat 2 8 Level meters onloy up to -10db ?

Hi.
in Totalmix ist alles normal, deshalb wundert mich das ja auch.
Kann ich in Digicheck RMS pro Kanal einstellen ?

Grüße
Alex

  • Registered: 2013-03-09
  • Posts: 58

Re: Adat 2 7 & Adat 2 8 Level meters onloy up to -10db ?

Ok, bei diesen beiden Kanälen war Loopback aktiviert, die Ausgänge jedoch ausgeblendet, so hab ich das nicht gleich bemerkt. Nach 5 Wochen bin ich nun endlich drauf gekommen...