Screenshot please.

No names appear at top of each input/playback/output whether "Show Names" is engaged or not.  Giberish appears vertically in any compact view of a strip.  (Have screenshots but haven't figured out how to post them.)

The new features are great, especially the support for multiple controllers! (and the new design is cool too)

I started opening new windows for my controllers, and I got lost very quickly when switching between them. I mean, could we have the info of what controller(s) the current window is linked to, in the top bar, or somewhere else visible? Perhaps even have direct-selection numbers, or tabs, or something similar to easily switch to a certain window? I can easily remember the order of the windows after setting them up, but when switching between them in mac os x, I loose the order real fast. (And I don't want to accidentally change the submix my controllers control by having the wrong window open)

Anyway, I truly appreciate the hard work you've put into this update! I think I might be falling in love with you guys. Thanks for any additional updates too, you know I check here almost everyday to see if something new has come up. :-D

Thank you so much. I noticed however, that if the Talkback fader is all the way down, it will refuse to move up when trim is enabled. (looks like this applies to any other fader too).

I have never understood this behavior in general.  I don't use the trim feature often, but when I do I usually have this small annoyance of not being able to move a fader that is set to minus infinity.  For me, changing this behavior for all of Totalmix would be a good update.  If someone knows a goood reason why the current behavior is preferred in general I would like to know what it is.

After troubleshooting by MC and his advice to reset the display card color depth to 32bit, names appear as they should in TMFX 099beta5.  (But you already knew RME was the best!)  Now I can fully discover THE NEW TMFX while awaiting the iPad remote.

Beta 6 is there - with fixes for some graphics quirks, the labels visible 16 and 24 bit color resolution, and the Talkback fader up when updating from the former release version. When updating from the last beta the advanced Talkback settings have to be redone, sorry.

A couple bugs to report: 1) Switching between presets, aspects of the interface change seemingly randomly - expanded EQ or D disappear and reappear.  2) On two unexplained occasions a Record button turned on that had not been selected prior - I'll try to verify.

Getting these Console Messages now:

7/12/13 2:00:03 PM    TotalmixFX[172]    kCGErrorIllegalArgument: CGSShapeWindow

7/12/13 2:00:03 PM    [0x0-0x11011].de.rme-audio.TotalmixFX[172]    Fri Jul 12 14:00:03 unknown0023121e159f TotalmixFX[172] <Error>: kCGErrorIllegalArgument: CGSShapeWindow

7/12/13 6:02:52 PM    TotalmixFX[180]    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

7/12/13 6:02:52 PM    [0x0-0x13013].de.rme-audio.TotalmixFX[180]    Fri Jul 12 18:02:52 unknown0023121e159f TotalmixFX[180] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Got a number of the above from:
2:00:03 PM to 6:02:59 PM

MacBook Pro Early 2008
OS X 10.6.8
Latest driver from forum which includes TotalMix 0.99 beta 6 MAC os x (1)

Hope this info is helpful.

That is a restriction of the Babyface hardware, discussed already earlier in this forum.

Im here on Fireface UC, driver 1.033, bios 118.

1) In the "SHOW" section:
when "2ROW" is lit, I've got 2 rows;
when "TRIM" is lit, I've got the faders acting as trims;
when "NAMES" is lit, I should have the user names (the ones that I gave) on the strips - and not the factory ones (Mic 1, Mic 2, AN3, AN4, etc).

2) There are a couple of FX buttons/settings that should not be present because UC has no FX.

Okkk, I'm sorry, I just read the manual By "NAMES" are meant the Original Names, before the re-naming by the user...

I am having a problem with the display in the record view panel in TMFX.  I am running a UFX with Windows 7.  Driver and firmware are up to date (1.033 and 353).  The display has all of the data such as record time blacked out.  This does not appear to affect the function.

Note that this also happens with my laptop (also running Win 7) and with two different recording media.

UPDATE - I discovered this problem only happens when D2D is not enabled. I had turned it off as part of troubleshooting some problems with Sonar and did not initially notice a difference so left it off.  Once I turned D2D back on the display is normal.  Seems like a bug that could be addressed (or something to work on at least).

are you able to tell us what plans RME has for new features in totalmix with future revisions ?

Thanks for the update, liking it so far. 

Might have a bug to report regarding the snapshot presets.  I find that when you switch between the mix states that are stored in the snapshots that the control room level reverts to 0.0 db even if you stored it at -30.0 db.  You have to switch about three times between different presets but eventually it happens.  This makes for really loud and unexpected high volume being routed to the studio monitors and it is quite unpleasant.  It would be nice if the snapshot tool would always preserve the output level for the sake of everyone's hearing and equipment. 

Thanks!

Matthias thanks very much!  It was the option that I did have checked.  Now that it is changed I can switch between all the snapshots and the volume level that was saved is what is loaded. 

Thanks again!