And Mac driver 3.19 brings back 10.6 compatibility.

New Windows driver 3.084 brings these changes:

- Separated names for the MIDI ports: 'FF800 Midi Port' for Fireface 800, 'FF400 Midi Port' for the Fireface 400, 'UFX Midi Port' for the Fireface UFX.

It also comes with TotalMix FX 0.997:

- Fixed crash when moving group fader while ‘FX Send to Main out’ was active
- Mic Gain CC MIDI control channel count now excludes hidden channels
- Reverb and Echo user presets can now be loaded via MIDI CC: B2 0C nn for Reverb preset 1 to 16, B3 0C nn for Echo preset 1 to 16

More to come!

Windows FireWire driver V 3.089 brings these changes:

- New: number of WDM devices can now be defined in the Settings dialog. A reduction accellerates the change of the sample rate, reduces the time of continued CPU load, brings quicker behavior on plugging and unplugging the unit, and reduces the boot time of Windows with connected interface. The best setting is 0, means no WDM devices at all. Only ASIO and MIDI are active then. A typical setting is 1 to 3 devices (WDM for Media Player etc.), also causing a much quicker behavior than full WDM channel count.

- Workaround for bug in Windows FireWire bandwidth management (no playback after several start/stops with change of the sample rate)

- In specific cases after changing the sample rate from/to single/double/quad speed a wrong buffer size was reported

- TotalMix FX 0.999

- Note: this driver version requires DIGICheck version 5.71 or higher!

Windows FireWire driver 3.092 brings TotalMix FX 1.00 with some changes and  bugfixes that we consider serious and urgent, although most users were not affected:

- Several bugfixes when loading workspaces (possible graphics problem after loading the same workspace multiple times; possible hang after multiple loading of workspaces with an Aux device setting; possible incorrect loading of Mac or iPad workspaces).

- Changed Channel Layout: removed column 'active'. The list now only shows the channels that are currently present, depending on the actual sample rate. This also fixes wrong channel names when using the option 'Count MADI Channels per port' with MADI devices.

- Global Trim Gains is now switched off with the Global Trim button only

Users of Fireface 400 and 800 don't need to update as the driver itself is unchanged to version 3.091.

Windows FireWire driver 3.099 is now available.

- Removes autostart of the old TotalMix
- Supports simultaneous display of the Hardware Level in TotalMix FX and DIGICheck
- Bug fixed: multiclient operation disturbed with WDM and more than one ASIO host

TotalMix FX 1.03
- Improved handling of the icon in the notification area
- 3 brightness levels to adjust the display to the monitor (Options - Preferences or F2)
- Restart of totalmixfx.exe loads the program from \System32 even on 64 bit systems
- CRM channel selection no longer limited
- Small graphics glitch with Mute and Solo buttons fixed (Group and 135%)

The latest FireWire Driver 3.100 brings TotalMix FX 1.05. Differences to the former 1.03 from driver 3.099:

- Volume of Listenback input is saved
- Fireface 800 default channels have been changed from AN 9/10 to AN 1/2 for Mains, and to AN 9/10 for Phones 1. These new values will only be set when TM FX is installed for the first time, or a Total Reset has been performed.
- MIDI fixed for the newly supported 'old' interfaces, fixing also various related side effects
- Settings (F3) did not work correctly. Chosing specific Talkback/Listen channels could cause more trouble.
- Clear Submix (right mouse click) no longer deletes the submix of Talkback and Listen inputs

Mac FireWire driver 324 includes TM FX 1.07. Changes compared to 3.23 with TM FX 1.03:

- Reworked launch agents of Settings dialog and TotalMix FX

TotalMix FX 1.07:
- Volume of Listenback input is saved

- Fireface 800 default channels have been changed from AN 9/10 to AN 1/2 for Mains, and to AN 9/10 for Phones 1. These new values will only be set when TM FX is installed for the first time, or a Total Reset has been performed.

- MIDI fixed for the newly supported 'old' interfaces, fixing also various related side effects

- Settings (F3) did not work correctly. Chosing specific Talkback/Listen channels could cause more trouble.

- Clear Submix (right mouse click) no longer deletes the submix of Talkback and Listen inputs

https://archiv.rme-audio.de/download/dr … ac_324.zip

Mac FireWire driver 3.26 changes the latency offset values reported to Core Audio to the correct values for the Fireface 802. It also includes TotalMix FX 1.10 with many changes and improvements, see readme.

Mac FireWire driver 3.27 has been reuploaded with a fixed installer working under 10.10.5.

Complementing this post in the USB driver update thread

https://www.forum.rme-audio.de/viewtopi … 46#p110346

FireWire driver 3.29 is now available, adding TotalMix FX 1.12. Please note that the DSP units UFX, UCX and 802 need to be firmware updated via USB to be able to work correctly with TM FX 1.21!

https://archiv.rme-audio.de/download/dr … ac_329.zip

Mac FireWire driver including TotalMix FX 1.21 is now available:

https://archiv.rme-audio.de/download/dr … ac_329.zip

Newer DSP units will have many new features in TotalMix FX 1.21, but require a firmware update to use them. Descriptions and links to the Mac USB firmware flash tools are described here:

https://www.forum.rme-audio.de/viewtopi … 46#p110346

Windows FireWire driver 3.119 adds digital signatures for Windows 7, 8 and 10. Note that on Windows 7 you need to have the latest updates installed or the driver will be shown as not being digitally signed.

https://archiv.rme-audio.de/download/dr … n_3119.zip

Mac FireWire driver has been updated to 3.31 and includes TotalMix FX 1.35.

Now this thread missed some updates. The latest one is Mac FireWire driver 3.38, shortly after we released 3.37. The XCode compiler that is necessary for Catalina compatibility destroyed the MIDI input functionality. Also fixed: partly black letters in Settings dialog with Dark mode.