• Registered: 2020-09-30
  • Posts: 37

Re: Problem with separate audio output in DAW

Perhaps, as an option, the version of the PME driver and the firmware have instability, I don’t know - I’m already tired of looking ...
Firmware v205, driver v408

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 3,517

Re: Problem with separate audio output in DAW

In Studio One settings I would choose System Audio instead of Babyface.

The Babyface is already the Interface in the System Audio in the Audio Preferences of MacOS.
just a try

M1-Sonoma, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2020-09-30
  • Posts: 37

Re: Problem with separate audio output in DAW

waedi, I tried - then the sound output to the phones is not displayed, only the main output

  • Registered: 2016-06-14
  • Posts: 1,013

Re: Problem with separate audio output in DAW

Denis-II wrote:

waedi, I tried - then the sound output to the phones is not displayed, only the main output

Guess why. Because the built in audio hardware on the Mac only has one stereo output channel. And this of course is assigned to the Studio One main out.

FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2

55 Reply by waedi (edited by waedi 2023-08-13 19:28:41)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 3,517

Re: Problem with separate audio output in DAW

Finally got Studio One Demo installed and working.

Routing to output channels works flawlessly, no problem.
The DAW is a bit clumsy but is working.
M1 Ventura
I selected the RME as audio device, all outputs available.

https://i.ibb.co/DChps0Y/Bildschirmfoto-2023-08-13-um-20-13-46.png

M1-Sonoma, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2016-06-14
  • Posts: 1,013

Re: Problem with separate audio output in DAW

Nice, Waedi. my tryout version had expired some weeks ago… 
I already discovered some differences between your and Denis-II's settings.
And of course there are 'SUB' outputs, not 'bus' - my bad, sorry!

FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2

57 Reply by waedi (edited by waedi 2023-08-13 19:45:20)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 3,517

Re: Problem with separate audio output in DAW

Why have here both tracks the same output ?
Post number 6 already shown this mistake !
Without being able to read it, it looks like both track sending to main out.
Make one to sub1 !
https://i.ibb.co/xjvTkQ7/main-out.jpg

M1-Sonoma, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2016-06-14
  • Posts: 1,013

Re: Problem with separate audio output in DAW

waedi wrote:

Why have here both tracks the same output ?
Post number 6 already shown this mistake !
Without being able to read it, it looks like both track sending to main out.
Make one to sub1 !
https://i.ibb.co/xjvTkQ7/main-out.jpg

You probably found it!
What is that in the box just above the marked one with the output? In your project it’s labelled 'keiner' (so 'none')?

FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 3,517

Re: Problem with separate audio output in DAW

Thats the input channel.
It's none because there was no recording, I dropped two MP3s into the arrange area for creating two tracks.
Only the output addressing was important.

M1-Sonoma, Madiface Pro, Digiface USB, Babyface silver and blue

60 Reply by Denis-II (edited by Denis-II 2023-08-14 08:53:41)

  • Registered: 2020-09-30
  • Posts: 37

Re: Problem with separate audio output in DAW

waedi,oli77sch - Thanks a lot! You really helped me! I chose SUB on the track, in the mixer, miracle happened - the routing started working!!! Turns out it's so easy! It turned out - it's so easy!)) I did it the way you have in the picture and now everything works like it should! Respect!!!
https://freeimage.host/i/HDXm7lj

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 3,517

Re: Problem with separate audio output in DAW

glad you can make music !

M1-Sonoma, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2016-06-14
  • Posts: 1,013

Re: Problem with separate audio output in DAW

waedi wrote:

glad you can make music !

+1
And I’m happy to see Studio One working fine on macOS, also combined with RME interfaces.

FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2

63 Reply by Denis-II (edited by Denis-II 2023-08-14 15:15:19)

  • Registered: 2020-09-30
  • Posts: 37

Re: Problem with separate audio output in DAW

https://youtu.be/R9LUkeWNE0k
https://youtu.be/bGhlmo6dFoo
This is part of my work, I am a patriot of Ukraine! Russian invaders want to appropriate my native land! We will not allow them - we are a strong nation, we have motivation - we are fighting for our land! Ukraine will win!!! I believe in it!!! This is a small part of my work. May the God of the peaceful sky bless you! God forbid you will not have such neighbors as the Russian Federation, God forbid!

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 3,517

Re: Problem with separate audio output in DAW

The music is well mixed, some photos seems to be oversaturated in colors.
I am Swiss patriot, our invaders run away from our folksmusic.
Best wishes to your people, hopefully the war disappears soon !
Slava Ukraine !

M1-Sonoma, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2020-09-30
  • Posts: 37

Re: Problem with separate audio output in DAW

Glory to heroes!