Re: Problem with separate audio output in DAW
Perhaps, as an option, the version of the PME driver and the firmware have instability, I don’t know - I’m already tired of looking ...
Firmware v205, driver v408
Check the TotalMix forum!
You are not logged in. Please login or register.
RoomEQ now available for Fireface 802 FS and HDSPe MADI FX!
Problem with separate audio output in DAW (Page 2 of 2)
RME User Forum → TotalMix FX → Problem with separate audio output in DAW
Posts: 51 to 65 of 65
Re: Problem with separate audio output in DAW
In Studio One settings I would choose System Audio instead of Babyface.
The Babyface is already the Interface in the System Audio in the Audio Preferences of MacOS.
just a try
M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
Re: Problem with separate audio output in DAW
waedi, I tried - then the sound output to the phones is not displayed, only the main output
Re: Problem with separate audio output in DAW
Denis-II wrote:
waedi, I tried - then the sound output to the phones is not displayed, only the main output
Guess why. Because the built in audio hardware on the Mac only has one stereo output channel. And this of course is assigned to the Studio One main out.
UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
Mac mini M1 - Macbook pro - iPad Air2
55 2023-08-13 19:16:31 (edited by waedi 2023-08-13 19:28:41)
Re: Problem with separate audio output in DAW
Finally got Studio One Demo installed and working.
Routing to output channels works flawlessly, no problem.
The DAW is a bit clumsy but is working.
M1 Ventura
I selected the RME as audio device, all outputs available.
M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
Re: Problem with separate audio output in DAW
Nice, Waedi. my tryout version had expired some weeks ago…
I already discovered some differences between your and Denis-II's settings.
And of course there are 'SUB' outputs, not 'bus' - my bad, sorry!
UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
Mac mini M1 - Macbook pro - iPad Air2
57 2023-08-13 19:40:48 (edited by waedi 2023-08-13 19:45:20)
Re: Problem with separate audio output in DAW
Why have here both tracks the same output ?
Post number 6 already shown this mistake !
Without being able to read it, it looks like both track sending to main out.
Make one to sub1 !
M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
Re: Problem with separate audio output in DAW
waedi wrote:
Why have here both tracks the same output ?
Post number 6 already shown this mistake !
Without being able to read it, it looks like both track sending to main out.
Make one to sub1 !
You probably found it!
What is that in the box just above the marked one with the output? In your project it’s labelled 'keiner' (so 'none')?
UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
Mac mini M1 - Macbook pro - iPad Air2
Re: Problem with separate audio output in DAW
Thats the input channel.
It's none because there was no recording, I dropped two MP3s into the arrange area for creating two tracks.
Only the output addressing was important.
M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
60 2023-08-14 08:46:19 (edited by Denis-II 2023-08-14 08:53:41)
Re: Problem with separate audio output in DAW
waedi,oli77sch - Thanks a lot! You really helped me! I chose SUB on the track, in the mixer, miracle happened - the routing started working!!! Turns out it's so easy! It turned out - it's so easy!)) I did it the way you have in the picture and now everything works like it should! Respect!!!
https://freeimage.host/i/HDXm7lj
Re: Problem with separate audio output in DAW
glad you can make music !
M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
Re: Problem with separate audio output in DAW
waedi wrote:
glad you can make music !
+1
And I’m happy to see Studio One working fine on macOS, also combined with RME interfaces.
UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
Mac mini M1 - Macbook pro - iPad Air2
63 2023-08-14 14:43:46 (edited by Denis-II 2023-08-14 15:15:19)
Re: Problem with separate audio output in DAW
https://youtu.be/R9LUkeWNE0k
https://youtu.be/bGhlmo6dFoo
This is part of my work, I am a patriot of Ukraine! Russian invaders want to appropriate my native land! We will not allow them - we are a strong nation, we have motivation - we are fighting for our land! Ukraine will win!!! I believe in it!!! This is a small part of my work. May the God of the peaceful sky bless you! God forbid you will not have such neighbors as the Russian Federation, God forbid!
Re: Problem with separate audio output in DAW
The music is well mixed, some photos seems to be oversaturated in colors.
I am Swiss patriot, our invaders run away from our folksmusic.
Best wishes to your people, hopefully the war disappears soon !
Slava Ukraine !
M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
Re: Problem with separate audio output in DAW
Glory to heroes!
Posts: 51 to 65 of 65
RME User Forum → TotalMix FX → Problem with separate audio output in DAW
Powered by PunBB, supported by Informer Technologies, Inc.