• Registered: 2015-11-14
  • Posts: 63

Topic: Need some help - I think with routing?

So, some time ago, I was having a problem getting sound into Audacity. That was solved. but only temporarily. It no longer works, and I am wondering if this is not a totalmixfx issue.

http://www.jeffreyhayat.com/mfx.jpg

is the issue potentially that I am not seeing anything in the hw inputs?

In my sounds (Win7 ctrl panel), in both pb and recording, the RME Analog 1&2 is set to default device. Any ideas?

RME HDSPe AIO with Windows7 Ult 64 bit.

Thanks in advance.

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,774

Re: Need some help - I think with routing?

Your screenshot shows the self-noise of the analog input, so it is working. There is just no signal attached from outside going in.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-11-14
  • Posts: 63

Re: Need some help - I think with routing?

Ok, thanks. So, any idea on how to get this working?

4 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,774

Re: Need some help - I think with routing?

Using the correct connectors?

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-11-14
  • Posts: 63

Re: Need some help - I think with routing?

Connectors? This is all ITB.

  • vinark
  • DAW Mastermind
  • Offline
  • Registered: 2009-06-05
  • Posts: 2,863

Re: Need some help - I think with routing?

The inputs are hardware inputs. If you need to record a software output you have to create a loopback that routs the output back to input in totalmix. Not sure how, cause the HDSP9652 I have doesnt have that, but search for loopback in the manual(or menu)

Vincent, Amsterdam
https://soundcloud.com/thesecretworld
BFpro fs, 2X HDSP9652 ADI-8AE, 2X HDSP9632
  • Registered: 2015-11-14
  • Posts: 63

Re: Need some help - I think with routing?

Got it - had to check loopback on the hardware output channel.

Thanks.