Thats very nice to hear.

@vanceen: I have a combination of UFX+, XTC and 12Mic running.
Administration via Web is well, but I also prefer Aux Device support.
Its better to have one admin tool and to be able to save and restore settings with TM FX as I am used to with the XTC.

BTW .. get RME SFPs to be on the safe side, I accidently picked the wrong multimode SFPs with wrong wavelength

Would be great, as each channel can have different reference levels.

This would be consistent then with the operation of the UFX+ and 12Mic / XTC
to be able to store and restore settings for an environment or special recording project settings.

Optical cables are immune for all kinds of electro-magnetic disturbance, plus do not connect ground (no ground loop). That's not only useful with long connections, but especially useful with long connections.

The M-1610 Pro doesn't have mic preamps, therefore no gain or phantom power to be set up. Reference levels are switchable (+13/+19/+24 dBu), but that's usually static within your setup, so Totalmix integration is not necessary.

Best
Marc

Sorry if I disagree. Just my $0.02..

Maybe this was not so important or "requested" in the "old times", where a converter with only 8 ports have only been bought by studio owners, where such a device typically became connected to a mixer which only needed 1 static setting for reflevel and where this converter was part of a fix setup.

But now we see devices which allow reference levels per port and we see more and more enthusiasts with different demands, which also look for such a RME converter with many ports for different purposes / use cases.
And why should this converter with "reflevel per port" be treated differently compared to an UFX+ where such settings can be stored in snapshots ?

It makes more sense to me that RME introduces an unique treatment for all devices so that you can say "the most important settings can be stored and recalled in TM FX snapshots for all devices" to sell this idea as a very unique RME feature.

This would also serve very well if you use devices in a mobile rack for different purposes. Then you can store and recall settings for different locations...

And I am personally a big fan of being able to store and recall all important settings of a complete RME environment and to have TotalMix FX as central tool for that.

Hello,
Is the Aux Devices integration of the 12mic (and maybe the AVB Tool) still planned ?
If so, when ? :-)

+1

+1

+1
I wonder what people should do who own a 12Mic and Micstasys. Afaik these two preamps cannot be controlled with the same application (Midiremote, Midiremote AVB, Totalmix).
Are there plans to include the Micstasys as well?
Georg

Agree. Esp Auxdevice for preamps I regard as an RME core feature for preamps.

Additionally, I would hope that Auxdevice feature becomes available as well for AD/DA converter, e.g.,
— selection of reference level (newer devices support per port settings)
— gain if applicable.

Hope Auxdevice will also come for AVB based networks in the future.

Besides remote control through TotalMix FX (which only covers remote control of most important parameters)
I regard it as important that remote control by TM FX/Auxdevice and any other remote control application like MIDI Remote
are compatible to each other and can be used in parallel, e.g., on the same MADI bus.
Currently, it's not possible to use MIDI Remote and TM FX at the same MADI bus for, e.g., XTC and ADI-8 QS.
Incompatibilities like this should be avoided in the future for whatever comes next.

+1

I really need TotalMix to integrate 12mic with UFX!!!

Please!

Thank You!

Yess

I would also love the 12 mic to work in totalmix fx

I alerady own both card <3

Thank you RME for everything you do and are !  Your are amazing mutch love !

Maybe this helps you as a workaround for now until Auxdevice support is there for the 12Mic:

The new application "MIDI Remote AVB" supports XTC, 12Mic, AVB Tool.

Download links:
Windows: https://rme-audio.de/downloads/RME-MIDI … -1.0.0.exe
macOS:     https://rme-audio.de/downloads/RME-MIDI … -1.0.0.dmg

It uses "MIDI over MADI", so you do not need Ethernet/LAN for operation (perhaps only for 1st time setup).

Below is a screenshot in case you didn't see it yet.
Although integration into TM FX is also my preference, I can tell that design and handling are excellent.
You can save settings to device presets and snapshots, comparable to TM FX.

Yes and the other question is whether two remote control programs which use MIDI over MADI can operate together.
I remember I had issues controlling
- ADI-8 QS (via MIDI Remote) and
- XTC (via Auxdevice)
at the same time over the same MADI bus.

Maybe it is easier for RME to integrate also the Micstasy into MIDI remote AVB (like the XTC).
Then he could at least control everything via one separate application.

+1

Any update on remote controlling the 12Mic over MADI?

Thanks in advance!

Ah yes, thanks! So there are effectively two versions of MIDI Remote which are required for setups combining 12Mic, Octamic XTC and Micstasy?

Hello,
Now the UFX III is done...

I'm also still hoping for the Total Mix Aux Device integration for the 12mic !

It's basically the last thing needed to use UFX and 12mic preamp as a multipurpose recording/live tool in a practical way.

Thanks.

Any news on this?

TotalMix integration would be really helpful especially for users with small screens (Laptop) - no need to use another app, because TotalMix is already running.

+1