1 (edited by mr-es335 2022-11-10 18:14:45)

Topic: HDSP 9632 and TotalMixFX

Good day,

May I ask why the TotalMixFX - Matrix View, displays OUT 1-2, then OUT 7 to 16?

Where are OUTS 1-6?

Thank you for your time!

Dell Krauchi
Sentinel Music Studios

2 (edited by ramses 2022-11-10 18:22:04)

Re: HDSP 9632 and TotalMixFX

What's your sample rate? Did you enable quad speed?
Check manual ch 18. There you see 4 ADAT channels @double speed.
At quad speed its 50% less, two channels because of port multiplexing.

SPDIF and analog ports are not affected.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

Re: HDSP 9632 and TotalMixFX

Ramses,
Thanks for the reply.
My sample rate is 48K

Dell Krauchi
Sentinel Music Studios

Re: HDSP 9632 and TotalMixFX

Really? Don't be fooled, maybe you use a different sample rate when using DAW/ASIO driver compared to using WDM driver for Windows and other apps that do not support ASIO.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

5 (edited by vinark 2022-11-10 19:56:55)

Re: HDSP 9632 and TotalMixFX

At least you have the correct number of outputs,1 and 2 are analog, 7 and 8 spdif and 9/16 adat. I think maybe 3/6 are for the expansion board that was-is available. Are spdif and adat 1/8 available in TMFX?
Could also be 7-14 adat and 15 and 16 spdif

Vincent, Amsterdam
https://soundcloud.com/thesecretworld
Babyface pro fs, HDSP9652+ADI-8AE, HDSP9632

Re: HDSP 9632 and TotalMixFX

Order of ports is different in the manual, vinark. Could kindly cross-check ch 18?

https://www.rme-audio.de/downloads/hdsp9632_d.pdf
https://www.rme-audio.de/downloads/hdsp9632_e.pdf

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

7 (edited by vinark 2022-11-10 20:32:19)

Re: HDSP 9632 and TotalMixFX

It is about the naming, you have 4 places with names,
1 in TMFX
2 in the matrix
3 in asio
4 in wdm
As far as I can see numbering/sequence is only different in the matrix.
I will see if I can check here, I have not fired my machine with the hdsp9632 in a while.
Oh I forgot, my hdsp9632s are in my caravan.

Vincent, Amsterdam
https://soundcloud.com/thesecretworld
Babyface pro fs, HDSP9652+ADI-8AE, HDSP9632

Re: HDSP 9632 and TotalMixFX

ramses and vinark,

Thanks for the replies...appreciated.

The user manual is pretty much useless to me - especially the diagrams. Totally lost!

I only use a single DAW application - all other audio sources are disabled running on WIN7 Pro.
• This system is dedicated to one function - and one function only.

If the primary functionality of the Matrix View is for more complex routings, then I really do not see any need for me to ever use the Matrix View.

At present my system uses ADAT 1/2 IN and ADAT 1/2 OUT...that is it!

Dell Krauchi
Sentinel Music Studios

Re: HDSP 9632 and TotalMixFX

It's fine to use submix mode.
I started to use the matrix after deleting all routings and implementing only the required ones.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

10

Re: HDSP 9632 and TotalMixFX

The additional channels are for the AI/AO extensions, but stay invisible when no such extension is plugged in. When you see these channels in the matrix but not the mixer view this might be a simple graphics bug in TM FX. Which version are you using? Latest one is 1.78, in just released driver 4.39.

Regards
Matthias Carstens
RME