• Registered: 2024-10-10
  • Posts: 4

Topic: MacOS Sequoia can't see Babyface Pro FS

Hello users.

Yesterday I reinstall the system on my MacBook (M2 Silicon), before reinstall the system I had no problem with my Babyface Pro FS, however after installing the system does not want to open Totalmix, and the system does not show the interface as a playback source. I searched the forum, I found information to give permission in “Privacy & Protection” settings, but despite reinstalling Totalmix and RME Fireface USB Settings there is still no such option.
Firmware: v320 Driver: v4.16
Thank you for your help

2 Reply by waedi (edited by waedi 2024-10-10 09:01:36)

  • waedi
  • DAW Mastermind
  • Online
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,453

Re: MacOS Sequoia can't see Babyface Pro FS

Hello Alphastia
You did reboot the computer, right ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2024-10-10
  • Posts: 4

Re: MacOS Sequoia can't see Babyface Pro FS

waedi wrote:

You did reboot the computer, right ?

Surę

4 Reply by waedi (edited by waedi 2024-10-10 09:03:50)

  • waedi
  • DAW Mastermind
  • Online
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,453

Re: MacOS Sequoia can't see Babyface Pro FS

Open Totalmix and Settings manually doesn't work either ?

what shows the system report under USB ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2024-10-10
  • Posts: 4

Re: MacOS Sequoia can't see Babyface Pro FS

I can see only this after open Totalmix
https://imgur.com/NSHeVaF

  • Registered: 2024-10-10
  • Posts: 4

Re: MacOS Sequoia can't see Babyface Pro FS

Due to the fact that DriverKit did not want to work, I decided to run through Kernel. Now it works. Thank you for your help.

  • Registered: 2024-10-11
  • Posts: 8

Re: MacOS Sequoia can't see Babyface Pro FS

I have a Babyface Pro and have been using it for years with no issues on a PC.
I recently purchased a Macbook Pro M3 and have not been able to get the Babyface Pro to work on this new computer.

Here are some of the configuration items:

Mac OS upgraded to Sequoia 15.0.1
Upgraded the firmware in the Babyface pro to the latest using my PC.
Installed the Driverkit drivers multiple times (never saw an Accept button to press)
Purchased an external power supply for the Babyface pro
Purchased a USB C/A adapter.

The Babyface Pro shows up fine on the PC and is not recognized on the Mac.

The only way I can get the Babyface pro to be recognized as a sound device on the Mac is by changing the mode of the device by pressing the select and dim buttons (while USB is unplugged).  The device then is recognized by the Mac, however the Fireface USB Settings application disappears in this mode.

When I put the mode back to the settings that work on the PC, the Babyface Pro is not recognized by the Mac and the Fireface USB Settings application shows up again (showing Firmware V206 Driver: v4.16).

In either case, the totalmix fx application always shows disconnected.

Can someone at RME shed some light on how to get this configuration to work properly.

Thanks.

8 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,537

Re: MacOS Sequoia can't see Babyface Pro FS

In Sequoia there seems to be a new trick to learn - allow any USB device, plus allow login items. See here:

https://forum.rme-audio.de/viewtopic.ph … 18#p225518

Regards
Matthias Carstens
RME

MC's Website