• Registered: 2024-10-15
  • Posts: 1

Topic: RME UCX II monitor options

Newbie here.

Is it possible to use the SPDIF-outputs as monitor outputs? My Neumann KH 120 II have SPDIF inputs.

Thanks.

2 Reply by waedi (edited by waedi 2024-10-15 08:06:47)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,453

Re: RME UCX II monitor options

Hi Nevets

yes, in Totalmix route signal to this output.
Do you know how to do that ?

you need the breakout cable, you have it ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • From: Valencia, Spain
  • Registered: 2024-04-18
  • Posts: 55

Re: RME UCX II monitor options

Hello

I have never used the SPDIF outputs but we can route all the I/O's from the CHAN/MIX front encoder on the UCX II, so you may choose to do it via TotalMix or via stand-alone.

UCX II 106/34/104 v1.253 TM1.97 - PC Win11 23H2 / Fedora WS 40 - Reaper 7.25
  • Registered: 2023-06-30
  • Posts: 146

Re: RME UCX II monitor options

My chain is UCX II -> S/P-DIF -> ADI-2 Pro -> S/P-DIF -> KH 750 DSP -> analog -> KH 120 A. Everything works like a charm.

So it's not only possible, it's recommended.

Fireface UCX II + ARC USB > ADI-2 Pro FS R BE > Neumann KH 750 DSP + MA 1 > KH 120 A