1,051 (edited by aroom 2022-07-25 12:11:48)

Re: The official Babyface Pro Thread

Output delay (time alignment) would be such a huge deal. I hope that it happen the sooner the better.

We already talked about it here : https://forum.rme-audio.de/viewtopic.php?id=26978

1,052 (edited by Manuel 2022-07-25 12:21:56)

Re: The official Babyface Pro Thread

aroom wrote:

Output delay (time alignment) would be such a huge deal. I hope that it happen the sooner the better.

We already talked about it here : https://forum.rme-audio.de/viewtopic.php?id=26978

I ordered a piece of gear a few days ago to do just that... if RME implements this I will have wasted several hundred Euro —and yet I won't mind smile

Fireface UCX II, BabyFace Pro, Fireface UFX, Fireface 400

1,053 (edited by ramses 2022-07-25 13:03:55)

Re: The official Babyface Pro Thread

aroom wrote:

Output delay (time alignment) would be such a huge deal. I hope that it happen the sooner the better.

We already talked about it here : https://forum.rme-audio.de/viewtopic.php?id=26978

I just see the result was, that this won't happen.

https://forum.rme-audio.de/viewtopic.ph … 84#p159684


Manuel wrote:
aroom wrote:

Output delay (time alignment) would be such a huge deal. I hope that it happen the sooner the better.

We already talked about it here : https://forum.rme-audio.de/viewtopic.php?id=26978

I ordered a piece of gear a few days ago to do just that... if RME implements this I will have wasted several hundred Euro —and yet I won't mind smile

What did you order to achieve this functionality?

BR Ramses
UFX+, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1650v4, Win10Pro22H2, Cub12Pro

1,054 (edited by Manuel 2022-07-25 14:13:10)

Re: The official Babyface Pro Thread

ramses wrote:

What did you order to achieve this functionality?

Behringer DEQ2496. It's on back order, probably won't be delivered till October 2022, but prices have started to get inflated recently and I managed to secure a unit for 285 Euro. Regardless of whether RME implement this, the DEQ2496 is a handy piece of gear to have around. It's a bit of a Swiss-army knife.

ramses wrote:

We already talked about it here : https://forum.rme-audio.de/viewtopic.php?id=26978

I just see the result was, that this won't happen.

https://forum.rme-audio.de/viewtopic.ph … 84#p159684

I may be misreading what @MC said but to me it seems he was talking about the echo effect, which is very different from delaying signals by a fixed amount. Without much knowledge of the technical intricacies under the hood, I'll bet the echo effect uses more DSP resources than just offsetting the output signals.

I've just created a new thread with a poll to find out how people are using their TotalMix FX, feel free to check it out and participate.

Fireface UCX II, BabyFace Pro, Fireface UFX, Fireface 400

1,055 (edited by ramses 2022-08-01 12:48:46)

Re: The official Babyface Pro Thread

> I may be misreading what @MC said but to me it seems he was talking about the echo effect,
> which is very different from delaying signals by a fixed amount.

Yes, you seem to be right,  I re-read and yes … sounds as this comment was related to the echo effect.

BR Ramses
UFX+, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1650v4, Win10Pro22H2, Cub12Pro

1,056 (edited by Manuel 2022-07-25 14:14:13)

Re: The official Babyface Pro Thread

ramses wrote:

> I may be misreading what @MC said but to me it seems he was talking about the echo effect,
> which is very different from delaying signals by a fixed amount.

yes, you seem to be right,  I re-read and yes .. sounds as this comment was related to the echo effect.

I just edited my previous post, pls take a look.

Fireface UCX II, BabyFace Pro, Fireface UFX, Fireface 400

1,057

Re: The official Babyface Pro Thread

I noticed the Babyface Pro FS has a hardware switch to adjust output levels. Does this allow to match up output levels between XLR and Line Out? Looking to match up levels for a quadrophonic speaker setup in a shared studio environment and was wondering if it can be done on the hardware site or if it requires each user to set it in the software...